To help prevent damage to the system board, remove the main battery, see Removing the Batterv. Remove the memory module s. Removing the System Board 1. Slide the touch-pad cable and power-button board cable into the connectors on the system board and press down on the connector latches to secure them. For information on the type of memory supported by your computer, see the Specifications at support. To flash the BIOS:
|Date Added:||16 July 2015|
|File Size:||8.27 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Install the drivers and utilities for your computer, as required. Ensure that the computer is turned off.
Dell Inspiron 14 N4050 14″ Celeron Dual Core Laptop
Replacing the Palm-Rest Assembly 1. Sira infel yung battery at dim na yung display. Top5 Dell Laptops 1. Release the tabs that secure the camera module to the display cover and lift the camera module off the display cover. This one is tough and is durable. See Removing the Camera Module.
Slide the power button board under the tabs on the palm rest and align the screw hole on the power button knspiron with the screw hole on the palm rest. Advanced Search for Laptops.
Full text of “Dell: Inspiron 14 Intel N Service Manual”
Click Close if the Download Complete window appears. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the module pops up. Push and release the tab that secures the Mini-Card to the connector on the system board.
Untel the screw that secures the USB board to the computer base. See Replacing the Camera Module. Connect the Mini-Card antenna cables to the Mini-Card.
Before Working I nside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to ensure your own personal safety. Remove the two screws that secure the intrl board to the computer base. If you are installing a hard drive from a source other than Inttel, you must install an operating system, drivers, and utilities on the new hard drive.
Pero sa speed nito If one or more corners of the module are higher than the others, the module is not seated properly.
Please check each shop before making your purchase. Reproduction of these materiais in any manner whatsoever without the written permission of Dei I i nc. Inspirob does not guarantee compatibility or provide support for hard drives from sources other than Dell.
To continue using , please upgrade your browser.
Do not use batteries designed for other Dell computers. Remove the optical drive. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board. I A component can be replaced or— if purchased separately— installed by performing the removal procedure in the reverse order.
Replace the display assembly. Computer Accessories External Hard Drives.
Replace the eight screws that secure the palm-rest assembly to the computer base.
Press down on the connector latch to secure the audio-board cable to the connector on the system board. Make a note of the display cable and Mini-Card antenna cables routing and remove them cma the routing guides on the display hinges.