The additional USB ports, which are mounted on card-edge brackets, will be provided as options. Make sure pin 1 of the cable connector is aligned with pin 1 of J7. Hour displays hours from 00 to Page Enabling Hyper-Threading Technology c. Connect the CPU fan to the 3-pin fan connector at location J13 of the system board.

Uploader: Voshakar
Date Added: 23 May 2011
File Size: 47.11 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 31458
Price: Free* [*Free Regsitration Required]

Other trademarks and registered trademarks of products appearing in this manual are the proper ties of their respective holders.

Make sure the colored stripe on the ribbon cable is aligned with pin 1 of connector J6. The CPU must be kept cool by using a fan with heatsink.

It has 3 functional blocks: Page 28 Hardware Installation 2. Retention lever Retention lever 4. The BIOS will not detect these categories.

The system board comes with the retention module base already installed. Move away any objects, such as another monitor or fan, that may be creating a magnetic field around the ps53. Handle the CPU by its edges and avoid touching the pins. The drivers are supported in the following operating systems: Uses the power button to power on the system. Click Start, point to Settings then click Control Panel. Introduction Chapter 1 – Introduction 1. Front Panel Connectors Hardware Installation 2.


This option is the default setting because it provides the most stable condition for the system. Excessively long formatting period. Includes high resolution monochrome adapters. This is because the system is capable of storing all programs and data files during the entire operating session into RAM Random Access Memory when it powers-off.

Use a diskette that is not write-protected. The processor shown under Computer should resemble the one shown below. Xfi example, you would use such a feature to accelerate cursor movements with the arrow keys. The power switch of each peripheral device is turned on. The cursor will move to the screen you select allowing you to edit information. Do not force the CPU into the socket. When power returns after an AC power failure, the system will automatically power-on.

Keyboard error or no keyboard present Cannot initialize the keyboard. Logical Primary or Logical Secondary sets the drives to master mode.


Make sure the memory modules are in the correct locations. Connect one end of the cable to the wakeup header on the card and the other end to location J10 on the system board. You will once again see the os35 diagnostics on the screen.


Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference.

However, there is no guarantee that interference will not occur in a particular installation.

DFI PS35-BL, Socket 478, Intel Motherboard

If you forgot the password, power-off the system and remove the battery. Make sure this field is set to Enabled.

The lever should click on the side tab to indicate that the CPU is completely secured in the socket.